Search Results for ‘coilovers’

I put coilovers on my car and they are at then end of their life so I will be putting some Koni Special Actives and Eibachs springs to replace the coils. Its been a while since I put the coilovers on and if I remember correctly I got rid of a lot of the stock suspention components as they were...

A. Item for sale/trade (model, specs, etc.): Riaction coilovers for 2007-2013 Mazda3/Mazdaspeed 3 B. Condition: New In box, Used, Good, Fair, Dented, etc. - Brand new, still in box C. Price/What you want to trade for: $420 (local pickup preferred but if you'll cover shipping, will ship) D...

Good day to everyone, I have just got new coilovers installed (BC V1) on my 2014 Mazda 3 and following that, had an alignment done. Alignment specs are as follows, Front left: Toe 0 Camber -1.5 Front right: Toe 0 Camber -1.5 Rear left: Toe 0 Camber - 1.5 Rear right: Toe 0 Camber - 1.5 I...

I was on H&R springs before, but wanted a little less travel so as not to damage my front fenders when turning and hitting a bump like a few members in a FB group have. There was also quite a bit of body roll with that setup, and I am happy to say that I no longer have that issue with the BC...

I'm thinking of either getting the corksport lowering springs for my 2015 mazda 3 or coilovers. I'm stuck between the two as I can pay a lot less now and just get the springs, and in the near future 1-2 years I'll have to end up replacing my stock struts anyway. Or should I just bite the bullet...

Hey everyone, I was wondering what coilovers would be best to go super low. I was looking at some extreme low BC BR series and some websites say that maxed out, they sit 4-5'' lower than stock height... But I emailed BC Racing and they say that the max drop from extreme lows are only roughly...

So i have a 2014 mazda 3 and am looking to lower my car however need some help because this is my first time ever doing coilovers. Looks like ive settled on the Godspeed mono-ss coilovers however am still open to suggestions but dont want to spend a crazy amount. Anyway when i do go to install...

Just got a set of these rev9 coilovers . Will be doing a installation tomorrow and review in a month . Lmk if needed in loas angles . I have a good plu

So two months ago I bought a Tein Coilover kit but was so excited to order them for my gen 3 I didn't pay close attention to the generation it was for. I'm an idiot lol. Anyways, wasn't able to get a refund as they received cosmetic damage on the way back to the warehouse. Redline360 was unable...

I have a 2018 Mazda 3 GT (2.5L) Hatchback and this will be the first car in my life that I'll be working on that I've had since 2019 January. The first mod I'll be doing is coilovers and I'm unable to decide which ones I'd want. Its between TEIN's Flex Z, D2's Racing RS, or maybe even BC Racing...

For sale 2014-17 Mazda 6 BC coilovers that I used on my 2015 Mazda 3. They will work on 2014-18 Mazda 3. About 25k miles on them. You will need to move lock rings as I don't have time or tools to do the work. I can add 10kg springs and rear linear adapters for additional fee Asking $400obo +...

can't decide you guys help me Which coils to get Godspeed or raceland Godspeed: https://godspeedproject.com/mazda-3-bl-10-13-monoss-coilovers.html Raceland : https://raceland.com/mazda-coilovers/mazda3-2010/mazda-3-primo-adj-damping-coilovers-2010-2013.html

Hey guys, looking to buy some used coilovers that are in still good condition. Please shoot me a pm on the price shipped you'd let your used coilovers go for and the name of the brand of course. I'm located in Minnesota. Thanks in advance!

Please suggest if i should get lowering spring or coilovers for daily drive ? I dont go track, i only want it to be lower and practical for everyday drive.

I just bought a 2018 Mazda 3 touring a few months back and planned on lowering it. Does anyone out there know if 2014-2017 model coilovers will fit the 2018? Only asking cause I noticed Megan doesn’t have anything regarding 2018 on their website and neither does bilstein. Any help is...

Hi guys, i'm looking to get a coilovers , please recommend me some. Btw anyone running on vogtland lowering spring + stock absorber ? whats the fender gap like ? 2 fingers gap? Because i saw someone with vogtland lowering spring + koni fsd had a 1finger fender gap, but one of a guy in my other...

Hi, I'm thinking to buy a set of tein flex z on my 3rd gen mazda 3 hatchback, has anyone tried this coilovers before ? i would like a comfortable ride with good drops, i want around 2finger fender gap and close to stock comfort coilovers, on my previous car i had a trash coilovers that bounce my...

Time has come that I need a bigger car so the 3 has to go. Id like to stock it out before selling it so lets make some deals. One catch: I need your stock parts. Im located in Bakersfield, Ca so Id like to keep it within a reasonable distance so we can swap parts. No shipping except maybe fog...

I have been doing more research for "comfort" coilovers. I have heard that KW v1 coilovers are less rough than other brand's coilovers. I also heard about Stance XR1's are quite comfortable too. but I have not seen many reviews or comparisons about Stance XR1's vs KW v1 or v2. Anyone have any...

Hey guys, Just asking around if people have experience with JBR coilovers. Its that time of the year where I randomly have the urge to research parts for cars but I never really pulled the trigger to buy some high performance parts for my car. I am really a noobie, but I do wonder if coilovers...