Search Results for ‘clutch’

Hey y'all! My 2018 Mazda3 has a high bite point and a considerable amount of free play. I looked to see if there is a push rod to adjust on the clutch but it appears there is no threaded rod with lock nut to adjust the pedal response. Is there another way to adjust the clutch pedal action? Or...

I have a 2015 mazda 3i touring, (61000 miles, manual transmission) when the ac is on and im sitting at a red light (mind you I live in las vegas so it's over a hundred degrees) the car literally starts acting crazy like it is going to die. Then when I go to take off it is sluggish and I feel...

2010 mazdaspeed3. my clutch lost pressure. I figured bad clutch. So I put a new nice clutch in with New oem master and slave cylinder. (The old clutch wasn't bad) So when I get my car back. I have like an inch of clutch pedal. A couple weeks driving like that and I lost clutch pressure. On my...

Hey guys, First off I'd like to apologize if this forums is in the wrong thread. My 08 speed lost clutch pressure one day as I was driving. so I took it home and started to go to work So far I have replaced the master and the slave cylinder hoping that would solve my problem but sadly no. When I...

Back story. Got it in 2016 replaced the clutch with a "kit" machined flywheel and rear main seal. Not done by me then was not very mechanically inclined. Anyway just recently at a stop near home thankfully went to push in the clutch and it felt noticably stiffer and has like a "rotational wurr"...

Got some crappy news on my 2018 Mazda 3.. the clutch and flywheel are toast at 45k miles. Upshifted into second on my way to pick up my daughter at school and although the shifter went into gear, the display didn't display the gear I had entered and the RPMs spiked like crazy.. no grinding...

Hey guys my car is at 91k miles and the clutch might need to be replaced. Anyone know if its better to get Exedy oem, or Exedy stage 1 clutch? What are the pros and cons for going stage 1? Note, I am mainly using my car as a daily driver. not planning to track or autocross

Alright so I started out going through forums to find out why my a/c compressor was not turning on while pressing the button on the dash, but I could only find limited information. Back story: I purchased this car private from someone as is where is. Initially (early in the year and it was...

Good evening all, I have a question regarding my recently acquired ‘17 Mazda 3. Whenever I leave from a stop in first I can hear what can only be described as a thudding noise. It will happen 5-6 times and then go away, I believe it is part of my clutch. I can’t feel it in the pedal but it is...

Sup everyone!? I've attached a video below of my slave cylinder (2014 Mazda3 w/ 57K) making noise as the clutch pedal is depressed. Just want some input from the local experts here confirming that this is most likely the slave, and not something else like the clutch fork? I'm also assuming the...

so I've had this car for like 8 months. its a manual 2016 i sport hatchback. the other day when i went to start it and i noticed when i went to shift into first the clutch engaged at a different point compared to when it normally does. then the point where the clutch engaged became completely...

Hello everyone, I'm currently in the process of getting a 1 off clutch kit made from Californiaclutch. Specifically a 2.0L one. Kit so far is Ceramic disc upgraded pressureplate aluminum flywheel with steel insert. It's not installed nor do i have any pictures yet. but i will update this as i...

Hey all I'm new to owning a Mazda but have owned Fords my whole life which this car is basically a Ford. I'm having trouble with my clutch and I hear a lot of people struggle with these dang things on this model. Last year I lost my clutch and it ended up being that the master cylinder was...

Ive been searching the internet in hopes to find a answer for this question but no luck. Anyone here know the maximum horsepower that the 2014 mazda 3 2.0L can handle just curious and how long do they on average last?

Greetings, amateur gear head here. Replaced ac clutch coil, pulley, cover, belt, rewired, etc. AC clutch engages when driving, but disengages at idle/low rpm. I know the clutch disengages for sure as i watched it happen. Pressure seems good. AC works well when driving (really cold air). It is...

Hey guys and gals, I just bought a 2010 Mazda 3 sedan, in great shape for a great deal! It was a real good price and I had to act quick. Unfortunately I didn’t realize these gens were plagued with clutch issues. Does every car have a faulty clutch or just the unlucky ones? Car has about...

2014 2.0 Hatchback Every now and then (usually on warmer days) I'll hear a whistling noise in the cabin after releasing the clutch. It usually happens after sitting at a light when the clutch pedal is depressed for longer than just changing gears. I'm assuming its something venting but the...

My transmission slips from 4->3/2 or 6->5 so I am replacing my clutch. I have done some research and checked different sites, I have been primarily interested in the Exedy kits, but there are two listed the MZK1012 and MZK1003. I dont know the different between the two. I read a forum post here...

Found this while searching for other OEM part numbers: My 2016 sGT (Japan built) matches part numbers with the clutch parts for the 2016 Mazda 6 GT These part numbers are from Mazdaswag.com Disc: PY01-16-460 Pressure Plate: PY01-16-410 Flywheel: PY01-16-610A Fork: PY01-16-520 ACT and Exedy...

Still waiting to find quality replacement clutches for 3rd gen 3s, I may have found a match. Doing part searches for my other project, I found matching OEM part numbers between my 2016 sGT and the 2016 Mazda6 GT. These part numbers are from Mazdaswag.com: Disc: PY01-16-460 Pressure Plate...