2004 to 2016 Mazda 3 Forum and Mazdaspeed 3 Forums banner

cbe

  1. 2013 MS3 CBE $180 obo

    Mazda 3 Parts - Buy / Sell
    Just off my car a stock MS3 CBE. Only $180!! obo. Looking for local pickup in the Las Vegas area.
  2. 2013 MS3 CBE $180 obo

    Buy / Sell / Trade
    stock mazdaspeed3 cat back for sale. As is, no hardware. Looking for $180 obo, Local pickup in Las Vegas area only.
  3. Borla CBE with K&N CAI, Now a Tune?

    2004-2009 Mazda 3 Performance & Mods
    What are your opinions on this? Is it worth getting a tune? My friend said that it'd make a big difference with a tune and those upgrades but I'm kind of skeptical on that. So what are your opinions?
  4. vibrant header and corksport cbe

    2004-2009 Mazda 3 Performance & Mods
    Hey guys I'm new here I've done tons of research but can't seem to find anything. I want the vibrant header but i don't know if it comes with a primary high flow cat or if the check engine light will come on. With that i was gonna get the corksport cbe with the race pipe. Would that mean i have...
  5. WTB CS/COBB Catted DP and CBE

    Mazdaspeed 3 Parts - Buy / Sell
    Subject says it. Looking to purchase either a CS or COBB catted downpipe for a 2013 MS3. Also interested in seeing if anyone has a CBE from either manufacturer as well. Post here or PM. Thanks!
  6. Corksport CBE vs Ultimate Racing CBE

    2010-13 Mazdaspeed 3 Engine and Performance
    Hello to all. I haven't been on in a while. it's been to long! I hope everyone is doing well... I know a while back I was thinking of the axle back exhaust from either corksport or UR, but now, I am going to a CBE. before anyone says search or listen to youtube videos (which are only partially...
  7. FS Magnaflow cbe for ms3 gen 2 part no 15557

    Mazdaspeed 3 Parts - Buy / Sell
    Asking 450 plus shipping. I am at Miami Fl 33126 If you have any question, please let me know. https://skydrive.live.com/?cid=632328c816fd6e1b&id=632328C816FD6E1B%213669&v=3&ithint=photo,.png&authkey=!AGK_50NyEDIkjDU Sent from AutoGuide.com Free App
  8. Getting a racepipe made for corksport CBE

    2010-2013 Mazda 3 Engine and Performance
    Ok so I did a little bit of searching on here and didn't find an answer. So I was wondering the specs on a corksport racepipe for the skyactiv CB exhaust. Or if it's even cost efficient to get a shop to build one. From what I see it's a piece of straight pipe with a small taper On one side for...
  9. WTB corksport CBE

    Mazda 3 Parts - Buy / Sell
    Im looking for the corksport cat back exhaust for a 2.0 sedan. I would like to get it with the racepipe also. Thank you to anyone who can help me out with this
  10. FS Mazdaspeed Parts Out: Magnaflow CBE, CPE Intlet Pipe and CPE Mount

    Mazdaspeed 3 Parts - Buy / Sell
    Hello, I have for sale - New Cpe rear motor mount for $125 shipped spec 60 durometer stage 1 fits all mazdaspeed 3 - Used Cpe turbo intel pipe for $165 shipped spec 3 inches to stock turbo fits all mazdaspeed 3 / 6 - Used Magnaflow Catback Exhaust for $500 shipped fits mazdaspeed 3 gen 2...
  11. FS: MS3 Stock CBE and intake/tip

    Buy / Sell / Trade
    I am selling my stock intake and tip as well as stock CBE. Came off of my 2012 speed 3. The intake and tip were removed at 800 miles and immediately bubble wrapped, will come with filter and all bushings/hardware. $60 + shipping. The CBE was removed at 18k miles, it comes with donut gasket...
  12. WTB: 2nd gen speed3 CBE, FMIC or TMIC, Coilovers, camber arms, wheel spacers

    Mazdaspeed 3 Parts - Buy / Sell
    Preferably either a Corksport or ultimate racing exhaust and fmic, and ets tmic, but I'm interested in any offers. Open to just about any brand of coils, camber arms, and wheel spacers I live in Philly area so something like the exhaust would probably best if picked up. I am willing to drive...
  13. K&N SRI, Magnaflow CBE

    2010-2013 Mazda 3 Engine and Performance
    I know what the manufacturers claim but was wondering what kinda of gains I'm getting out of these. Any idead?
  14. FS: 2.5l dual corksport CBE w/racepipe

    Mazda 3 Parts - Buy / Sell
    Hey guys, so it is time to sell my exhaust system. First off im not selling it by choice i love it and i sounds awesome. Im selling it because i am going to start commuting more and i rather optimize MPG. So that being said. The exhaust system is complete with racepipe sorry pics are not that...
  15. Just bought/installed a Corksport CBE with racepipe!

    2010-2013 Mazda 3 Engine and Performance
    Here you guys go! I haven't driven it yet, that will come after I install my new headunit and amp/sub tomorrow! 2011 Mazda 3 GS 2.5L Corksport exhaust - YouTube Hope you guys enjoy it :P
  16. WTB UR CBE 2013 mazdaspeed 3

    Mazdaspeed 3 Parts - Buy / Sell
    I have a 2013 Mazdaspeed3 and I am located in Las Vegas NV. looking for a CBE and i would like Ultimate Racing but i am open to others as well. I am looking for a near new system so no big dings or scratches or chopped systems.
  17. UR CBE

    Mazdaspeed 3 Parts - Buy / Sell
    Local only for now (Carson, CA). UR CBE $460 pickup $520 shipped No issues with the exhaust. I cut the rear hanger piece shorter so it never bangs (used stock hangers with my setup). Exhaust is filthy right now but the new owner is welcomed to clean it Just in case you forgot how it sounded...
  18. WTB: gen2 speed3 CBE, DP, Coilovers...

    Mazdaspeed 3 Parts - Buy / Sell
    Hey guys Just bought a 2013 speed 3 last week. Looking to get to work on my new project car... So far I have a Cobb AP, CS stage II SRI, TIP, and Cobb BOV I am interested in some used parts, so if you have anything for the new gen speeds that you think I'd be interested let me know...
  19. WTB AP,CBE and HPFP

    Mazdaspeed 3 Parts - Buy / Sell
    I am looking for an Accessport,Catback exhaust and internals if you have any for sell send me a message with the price and a picture of it if you can!:stuart:
  20. Reattaching exhaust after Corksport cbe

    2010-2013 Mazda 3 Engine and Performance
    So I'm looking at the Corksport catback and I'd like to know if the end fitting is a slip tube that would go around the exhaust or is it a butt up kind of connection for possible reattachment of the stock catback? Popos and dealerships can be dicks about exhaust in my area. I'm assuming if its...
Top