bushings

Hey all how’s it going? I’ve been looking into getting some solid shifter bushings and thought might as well get a short throw shifter too. Problem is, I cant find any haha. It seems people only make short shift plates for the 1st gen's now. I think I'm a little late too cause it seems all...

$25 shipped and paypalled. These are $30 plus tax on the JBR page. The JBR Solid Shifter Bushings create more responsive shifts in your MAZDA. Having solid spacers removes the sloppy feeling from the shifter, greatly improves shifting accuracy and allows the driver a more connected driving...

Thought I would bring this bit of knowledge from other forums where I posted this. It's not that difficult a job, but plan on it taking the entire weekend if/when it's your first time due to the learning curve. It will be worse if you live in the Rust Belt. This is a job where I advocate...

Anyone knows if there is enough clearance to regrease as needed? I am planning to do the RB front bar and use greasable bushings but not sure about the clearance. I know some people use JB greasable bushings so I assume it should be ok but just want to confirm and save me some labor removing...

Up for sale is a TWM Short Shifter Kit with the Bushings for Mazda 3 2010-2013, 5 & 6 speed (NON-MazdaSpeed, NON-Skyactive). Asking $80CAD. Retails for $136.90USD ($175.54CAD) I'll meet anyone in the GTA that wants to buy this otherwise a shipping charge will be added. Thx

Sorry I posted this in the wrong area. It has been moved. Thx

Has anyone purchased the Corksport Shifter Bushing set? (Link here). If so, what are your thoughts on it? How is shifting improved for you? Is it worth it?

I decided to try some solid shifter bushings on my Mazda 3. They came with good directions and pulling the console covers off was a breeze. Before I unbolted the shifter, I grabbed the shifter bracket and tried to moved it, and noticed it was firm and there was hardly and movement in the stock...

Im still a little scatter brained after reading all the threads.....does anyone know the exact part numbers for superpro front control arm bushings ill need for my 2013 speed3? spf3115k & spf3368k?

Just to wanted to know how has been the experience of those who have installed solid shifter bushings on there cars. I'll be installing them on my car but wanted to hear from some members how has been there personal experience. Solid shifting? any vibes on the shift knob? markable difference...

CORKSPORT Mazda Shifter Bushing Set Eliminate side to side compliance and remove the slack on your shifter by replacing the rubber OEM shifter bushings on your manual transmission Mazda with the CorkSport aluminum black anodized shifter bushings. Over time, shifting gears can cause the...

Details: All aftermarket large diameter sway bars that include yellow zinc plated brakets occasionally suffer from broken sway bar brackets, even our own! Well, we now have the solution for owners of all 1.25” sway bars regardless of manufacturer. These brackets are guaranteed to be trouble...

JBR Solid Shifter Bushings replace the stock Mazda rubber grommets that hold the shifter cage to the floor board. The JBR Solid Shifter Bushings create more responsive shifts in your Mazda. Having solid spacers removes the sloppy feeling and greatly improves shifting accuracy and your driving...

Today I was told me driver side bushing is bad in my Mazda3. It makes a loud noise when weight is transferred and it's annoying the crap out of me. They said that Mazda doesn't make OEM replacements, and that the entire subframe has to be replaced. Well I can't afford $1530.70, so I'm on here...

Brand New 3P vacuum block. Will throw in the shifter bushings to the buyer. $40 shipped.

Up for sale is a mazdaspeed3 rear sway with bushings that will let it fit on a mazda3. This was removed from a 2010 mazdaspeed3. Looking for $50 + actual shipping in the CONUS. I have 250 positive feedback on ebay under runningmanngt, and positive feedback on s2ki and overclock Thanks for...

hey fellas, im looking to buy a sway bar but im not sure which to buy, a rear or front sway bar? I simply wish to be able to take corners harder without the weight of the car shifting to one side and causing me to slide. i mean they (corksport) have the chassis brace, a tower bar, a lower arm...

Does anyone have the solid shifter bushings installed on their 6MT skyactiv. Is there a write up on how to get to and remove the old rubber bushings in our cars? Also do they really improve the shift feel and how? thanks They are from James Barone Racing

Ok guys, so since its freezing out and i dont wanna wear like 20 coats just to do any mods, i wanna do an inside one like the Solid aluminum shifter bushings for the gearbox. Now my questions are. Do these fix the missing 3rd a lil better? i miss 3rd gear quite often and it seems to be...

part# 19-1119 Expectation: What I had in mind was to spend as little as possible on mods to reduce body roll. Size: Racingbeat listed 22mm front and 20mm rear as stock size so I took that as the reference and bought them from Amazon. Fitment: The bracket is a bit a the short side, but managed...