Hey! I'm new to the whole modding thing and my mazda is my daily but also the car I want to mess with the most. I have quite a few questions and need to understand this better so bear with me What turbo will fit onto my car? What do I need to do to my engine FIRST before I put the turbo in to...

I know I know, I had told myself that I was NOT going to boost this car... buuuuuut now I'm scheming :) *cross posting from Mazda6 forum to get more input - Considering supercharer on the 6 Eventually I plan to get an NC2 Miata and make a boosted track monster with 15psi+, and I know the 6 will...

Hi All This is my first post and I hope you can help me out here. I bought my first Mazda ever like 1.5 months ago. Its a Mazda 3 2.2 from 2015 with 150 HP The problem is... I lack power - especially in higher rpm's. I went to a dealer yesterday and they read the ECU but they couldn't see a...

I have a 2010 mazda 3 GT that i need to make more powerful. I live up in the mountains and the stock parts are just not cutting it for me in terms of having the power to climb big mountain passes. I have had a altitude tune on the car to help in the meantime whilst i find out what i can do to my...

Hello, I want to increase the power of my mazda 3 Grand Turing engine 2.0L 153 HP, how can I upload a 50HP or 60HP, but he read in many forums that the skyactiv engines are somewhat complex, what do you advise? >:) Thanks.

Hi! I have a 2011 Mazda 3 that injested some water and bent a rod, currently I have the engine pulled and my check book out, I've purchased a Garrett GTX 3067R and the exhaust housing that they sell fits right up to the Mazdaspeed exhaust manifold. So that's where I'm at! I'll be starting a...

Hello, A classy first post of thinking i may have used the wrong pipe for the boost gauge pipe. Which one should it have been? Once you've finished shaking heads/laughing, could i be corrected ? 2013 Skyactiv d Mazda3

ok so currently im talking with tripoint to getting one of their kits, I also have DT tuning support. now while sourcing out the stuff I need that is outside the kit, I recalled coming across this ultra gauge. now I know it automatically reads what gauges to use with the car. my question is...

This may be a stupid question, but bear with me :) I live at altitude, like 6000ft. I am content with my 2.5L, but can't help but feeling like I'm missing out on its true potential. I heard somewhere that at this altitude, NA engines only produce about 75% of the power they output at sea...

So i was sitting around thinking how to void my warranty on my fresh 2014 Mazda 3. And so what better way than turbocharging it.... Well anyway, a homemade piggyback ecu, a 25psi turbo, and a crap-load of time and energy later..... BAM!!! My warranty was successfully voided. Ill take pics of...

Planning to upgrade and looking to sell. ( sorry for bad required pic. cold/dark in garage. better tomorrow ) Way more options than FIC 6 Better calibration control Way more options Boost control RPM / Tach output for Boost by gear etc 40PSIA ( 25PSI boost ) MAP sensor onboard. This thing is...

If anybody ever needs any parts or tuning, my name is Adam and I work locally here on Mazda's as well as most other imports, but we do specialize in Mazda's. If I can ever help you with anything at all, call us for a quote or more information. My number is 561-395-5700. Give us a call and ask...

I recently took off my safemode surev2 map I was running which was producing about 15.5 psi. I flashed a stage 0 stock tune and monitored the boost and I was pushing 18.1 psi at WOT. Before I put the safemode map on, I was trying to run the Stage 1 Surev2 map which required a sure intake and TIP...

Hey guys I just installed a prosport boost gauge on my 2012 mazdaspeed 3. it looks and works great and the install was pretty easy and fast. comments wellcome. not the best set up but looks clean. i didnt want to punch any wholes in the car.

Recently installed my turbo smart boost gauge in my pillar and sprayed plastics black as there is no gauge pillars for a RHD mazdas [/IMG] [/IMG] [/IMG] [/IMG] [/IMG] [/IMG] [/IMG] Sent from my iPhone using AG Free A few pics when I had it pulled apart to spray plastics [/IMG] [/IMG] [/IMG]...

ok guys, don't hate! Please! I want a Gsx, I can't say anything else. gsx > turbo mazda 3. Vacation cancelled heh christmas/thanksgiving sale. ASKING PRICE : 2900$ + 150 Shipping 2.0 - 2.3 - 2.5 Turbo kit ( Not skyactiv ) ready to go, drop it in. it mates up to stock exhaust. Kit includes ...

OK, SO I think I have figured out my christmas plan on turboing my 2.5 mazda 3. looking for a possible 40-50hp gain at the wheels, my ultimate goal is for a solid 210 at the wheels with at least 200 TQ OK for the setup that I will utilize : a Small mitsubishi Coolant and oil ran Turbo internal...