2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Hey all! I recently had one of my low beam headlights go out, and usually when something goes out or wears down on this car, I always try to upgrade it with something better. I have a 2013 3 with regular halogen bulbs. I’m happy with the color, brightness, throw distance, etc... but would like...
  2. Exterior Lighting
    I have a 2014 Grand Touring s Hatchback. I looking to replace my low beam lights. I have two choices the first being Low Beam: H11 Full Xenon HID Conversion Kit, and the second being Low Beam: H11 LED Headlights - Nova Series. I wanted to know which would be brighter and if both would fit with...
  3. 2014-2018 Mazda 3 Skyactiv Audio & Electronics
    The stock setup of the high beams running at half voltage as the DRLs is bad for the filament of halogen bulbs. Halogens need to run at (near or over) full voltage for the actual halogen cycle to work. Lifespan and luminosity are both negatively affected with the stock setup. Inspection of...
  4. 2004-2009 Mazda3Appearance & Interior
    Dears, I need your suggestion about the low beam led or HID that I can use for my mazda 3 2007. I have a real issue with my current bulb, could you please help me to find a good product in aliexpress. (there is no shiping to morocco with amazon or ebay...) Thank you for your support.
  5. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I ordered a front turn signal that acts as a DRL white, then switches amber for turn signal. I always disliked the orignal yellow-ish DRL, can i disabled it, but do want to keep high beam for safety on the streets. You guys probably already know, DRL and high beam uses the same bulb. Thanks
  6. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    2016 3 i Sport, halogen projectors I had a bunch of repairs on my 3 from a recent accident, including replacing the headlights. The shop used OEM replacements. I was checking the aim last night and noticed the beam cutoff color is different on the left and right. On the right it's that nice...
  7. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hello everyone. I need help. Sorry I’m advance for the lengthy post. I have a 2018 6 speed Mazda 3 hatchback. I installed the H11/9005 with the R1 resistor kit and it’s been working great for a couple of weeks. Yesterday afternoon I installed the JBR short shifter plate/bushings and the...
  8. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    My 2011 Mazda 3 GX with Halogen headlights has 15amp fuses for low beam. A 55W XID kit I bought requires 20 amp fuses. Does anyone know if you can safely just change to 20 amp fuses.
  9. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Hello everyone :smile2: , Is this pattern normal , you can notice this elliptic black spot , tried many different halogen bulbs with same result :| Thanks in advance :wink2:
  10. 2014-2018 Mazda 3 Skyactiv Discussion
    I have not tried this feature but supposedly it switches between high and low beam automatically? Anyone here have feedback on how well this actually works in the real world?
  11. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hi, I think this question has been asked a lot of times on this forum but most of the time the conversation stops abruptly. So I thought maybe we can have all the answers in one place. I want to change my yellow halogen bulbs on DRL/High Beam to white (6000K) LED. On reading up some of the...
  12. 2004-2009 Mazda3 Audio & Electronics
    Hi, I have a 2008 Mazda 3 Sport (Hatchback) in UK. The right hand side (driver side) low beam stopped working. I changed the bulb and checked the fuse but it is still not working. Any help would be appriciated, Thanks
  13. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Are there any bulbs/ setups that have a safe drl (non blinding ) in white that can also function as a high beam light in the reflector housing? I'm planning to switch the stock halogen in the projector bulb to HID which will probably down out the stock highs so naturally I would still want them...
  14. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Anyone have any experience with led headlights? I just wanna do the low beam headlights. Every place I have called locally said that they are more realible than hids. I have a 2016 Mazda 3 isport sedan. Thanks a bunch And is it possible to access the low beam bulbs without taking off...
  15. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    I'll let you guys know how they do. All I can say right now (in full sunlight) is that they turn on and don't blow any fuses. Well, and they hurt to look directly in them. :smile2: All "H" series bulbs have the filament in exactly the same location, so the pattern should be identical, except...
  16. 2014-2018 Mazda 3 Skyactiv Discussion
    I have a 2014 Mazda3 SportNav and when I turn on ignition the main beam headlights come on despite the selector being in the off position. The tail lights also come on. No matter what position I place the selector switch in, the main beam stays on even though the instrument panel does not show...
  17. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hey guys and gals. I was wondering what the typical beam pattern for fog lights usually are. I was tinkering with the idea for installing Morimoto X.pods rather than pick up the OEM ones. Since I don't have fogs, I would cut out the shape onto the existing plastic housing and fabricate a custom...
  18. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just wondering if anyone else's high beams look like this or if something is wrong here. It can be very distracting as it lights up things you are passing under.
  19. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hello everyone, I have a 2014 Mazda 3 Sport. I recently purchased the iJDMTOY Super Bright 9005 LED Daytime Running Light Kit to replace my yellow bulbs. I really like the color of the LED, its a white color with a blue tint (I think it's 6000k). 2014 and up Mazda3 Mazda6 9005 LED Daytime...
  20. New Member Introduction & Forum News/Guide
    I installed HID kit with Can-bus Ballast ( 6000K ) It was very simple to install but not easy because small space to work. I am very satisfied from result. I really recommend can-bus one ( simple and no long wire ) I try to post picture next time. Also I installed LED bulb for inside light. So...
1-20 of 26 Results