arms

Hi I'm Justin and I need to replace the lower control arms on the right of my 09 mazda 3 and want to know if anyone has ever used hardrace's products it looks good.

Took my car in for an alignment and they said they couldn't get left rear wheel within spec. -3.3 camber, actually increased -0.2. They told me I need new rear camber arms as is common with small mazdas. They quoted me $136 each plus $135 labor. Thought that was bit much so I went to rock auto...

Hey guys, I am looking to get rear camber arms as I am rubbing a bit in the back. I am thinking about either JBR, SPC, or Eibach. Anyone have any experience with either of these? I am leaning more towards JBR since they are pretty reliable and cost wise it is in the middle of the other two.

got a 2015 MZ3 in Canada, and i've noticed some unusual rust forming on the front control arms and the cat-back to muffler section of the exhaust. this car has seen one winter (which i admit is harsh here with all the salt) but i did take the time to undercoat the vehicle. didn't go half way...

Hey folks, I'm new here but have used lots of the info on here for the past couple of years. I was wondering if it was too diffucult to replace the REAR DRIVER upper and lower control arms, trailing link, and and lateral link? I've done minor work on my 3 and others but nothing this...

Selling a set of OEM Left/Right Rear Upper Control Camber Arms for $50 +shipping. Removed from my 2012 mazda 3 at approx. 5000 miles.

Details: Rear camber arms are often overlooked when it comes to lowering until the rear tires need to be replaced after only 10k miles. Unfortunately, the stock suspension does not allow for the necessary adjustments to correct this problem. Adjustable Rear Camber Arms correct the additional...

...seems like I've been out of the loop on a lack of support from Dom. Edited to remove links, as I don't want to support someone that doesn't support the community.

$70 James Barone 2014+ Mazda 3/6 adjustable rear camber arms. These are for the 3rd gen Mazda3 (BM chassis)/Mazda6 (GJ Chassis). Never installed, complete set. Used to adjust camber as the rear camber is not readily adjustable. Especially after lowering. These are the original version, they...

Details: JBR Adjustable Toe Arms will allow for correction and fine tuning of rear toe that's commonly associated with lowered vehicles that results in uneven tire wear. Increase cornering response whether your on the street or on the track with up to +/-5 degrees of adjustment. Constructed...

I'm looking for rear camber arms for the summer, adjustable aftermarket ones of course, not OEM, I live in Regina, Saskatchewan, Canada, if you can post your price with shipping included that would be awesome! Thanks!

So I have been in the market for camber arms and I was trying to get the DE ones well after about 3 months never heard back from him of course. So I went with the CS ones as they allowed for the most camber. Anyway right after I had received them a used DE set popped up and I snagged it. So my...

I bought these spc camber arms a while back and never got the time to put them on sadly. So now looking to get $100 for the pair

Details: Rear camber arms are often overlooked when it comes to lowering until the rear tires need to be replaced after only 10k miles. Unfortunately, the stock suspension does not allow for the necessary adjustments to correct this problem. Adjustable Rear Camber Arms correct the additional...

All parts came from a 2010 Mazda 3. I can ship but buyer's expense. I'm located in 90502. OEM License Plate Mount - $10 OEM Rear Camber Arms - $ 50 Corksport Adjustable Rear Sway Bar - SOLD Email: [email protected] Text: Four2Four-757-387three

Im Planning on Buying A new Set Of Rear Camber Arms Soon, Im not sure Which Brand to buy.. Currently i Have Been Looking at: Eibach, Dominant Engineering, Spc, Megan rancing, And JBR I know Dominant Engineering and JBR use welded Tubing, but the bushings on DE are of better quality . Eibach...

As the title says, I'm looking for adjustable rear camber arms for sale. Shoot me what ya got and price please!

Just got my set of Dominant Engineering Arms. No need for these. Used for a few thousand miles. Little rust from the winter, But works Perfectly fine $70 + shipping

Got rid of my 2012 Mazda 3 a while back and never had time to get rid of my parts until now lol. Corksport Power Series Short Ram Intake for 2.0L (NOT SKYACTIV), was on car for probably around 7,000 miles. Will be shipped in the CorkSport box. Price is $100 shipped + 4% paypal fees or $100...

Hey guys I just got my alignment and new tires. I'm on Rm1.25s. I'm curious to see if my camber are within specs for the fronts. Apparently, they could not adjust the front right because they said I needed camber plates. Is that correct, we can't get our cars into spec without those plates? or...