Nobody makes a full aluminum race radiator for the gen 3, so I am sizing up off the shelf options for an adapt-to-fit setup. So far I have narrowed it down to either a 2002+ Acura RSX (Mishimoto 2 row) or a 96-ish Civic half size (Mishimoto 3 row). CAD images below to compare to the...
Selling my Genuine Mazda Aluminum sport pedals
used in great condition.
Part# BHN1-V9-095 (foot rest)
Part# BHN2-V9-091A (Acelerator)
Part# BHN1-V9-093 (brake pedal)
Total selling price: $90.00
Local pick up only in Bayside, NY
For sale are new iJDMTOY brand aluminum push button start overlays for the 2014-2018 Mazda 3. Both are unused and still have the original double-sided tape covered.
Asking $15 shipped within the continental U.S. for the red surround ring and silver button cover.
PM for Paypal address.
Three of my stock wheels have varying degrees of curb rash, I bought the car used, with some being pretty deep and noticeable so I have been thinking about attempting od repairing them with bondo. I came across a couple of youtube videos that show how and it seems pretty easy and straight...
Hey! For anyone interested buying these pedals I would like to share with you my short experience with these:
Yes! They look good! But here are some important things to consider before buying or after installing them:
1- Depending on the seller (bought on eBay) some pedal covers might...
Hello, picked up my mazda 3 in the beginning of the week, my dealer was not able to fit the aluminium pedals correctly, it's missing the rest pedal and the accelerator pedal does not have the rubber...
They used two screws to hold the accelerator. Is this correct?
Could you guys share a...
Going on 3 weeks on my 2017 Mazda3 Sport and I am eyeing basic updates (for now). I am considering DIY install of the OEM foot pedals (foot rest, clutch, brake, accelerator) and have found instructions on how to install all of them but realized they are for LHD cars.
Not a problem on...
I mistakenly ordered these for my 2017 and realized after they had shipped. These will not fit a 2017! As advertised, these are for 2004-2009 Mazda3 models. $12 paypal/venmo/squarepay.Shipping from SD,CA.
OK I hate the plain rubber pedals on my 2017 hatch. And I'm not a cheapskate so I would really just get the Mazda ones and skip out on the deadpedal as as it's covered by my carpet liner. Anyways what I'm not into is drilling on the interior for that accelerator pedal as the guide shows. So...
So I thought I hit a stopping point w/modding my 2014 3GT finally until i sat in my buddy's GTI. After feeling & driving his car w/the Suede wrapped steering wheel & extended Aluminum paddle shifters I am hooked! One of my crazy savy automotive buddies offered to match my Mazda's cockpit to our...
saw corksport post this on Instagram. Looks really nice and will feel a lot better than the plastic mazda uses on the knob. Probably going to have to purchase and report back.
Mazda 2014+ Interior Multimedia Wheel Cover
I purchased a set of 17x7 Sparco Tarmacs from Tirerack. The order included centering rings and tuner lugnuts.
The centering rings that they included are plastic, Gorilla brand. The rings show 73.0mm OD and 67.06 ID markings. They fit quite snug when installed in the wheel. I've heard that...
Quick guide on how to replace your shoddy manual knobs with better looking ones.
-Knobs look and feel over 9000 times better
-Knobs where meant for the 2nd gen so slight modification is required
-Knobs are just a tiny bit tight because they're meant for 2nd gen
So I was looking on eBay for general 2014 Mazda parts, came across CX-5's MT 4 Pedal set, which includes: Dead Pedal, Clutch, Break and Gas.
They are rather way cheaper then the 2014 Mazda 3 one's themselves. So I was wondering if they would fit my '14 Mz3, if anyone knows.
So my car finally arrived and I was in the process of installing the aluminum foot rest and noticed it's manufactured the wrong way?
Anyone else have this issue with the 2014's.
Seems like this is a universal part for the 6 and cx-5.
UPDATE: so it seems i had the install wrong...