2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

adjusting

  1. Help adjusting headlights

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    New member and need some help! Owner of 2015 Mazda 3 iSport. Replaced the OEM with LED lights and have tried to adjust the lights up. Read the how to adjust with a phillips head screwdriver and when I turn the adjustment screw (either way) there is no effect. Any help would be greatly...
  2. Adjusting High-Beams on 2018 Touring

    2014-2018 Mazda 3 Skyactiv How-To Guides
    Have researched this and seen pictures of phillips head screws or hex head screws to adjust the headlights. And expect that adjusting high beams is no different. But I am unable to find such on my Touring. I don't think it has level-adjusting headlights (never seen them dip on startup). Did...
  3. Adjusting headlights

    2010-13 Mazdaspeed 3 Appearance & Interior
    How do I adjust up and down?
  4. headlights adjusting

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    I want to adjust the headlights after an hids install. I cant find the adjustment screws for the headlights. Where are the adjusters for the headlights? How do I adjust them ?
  5. Adjusting Shifter Position

    2010-13 Mazdaspeed 3 News & Discussion
    I searched around and couldn't find an answer to my question. I found this: Jamiesplanet.com but I dont think that's what I need. That seems to move the shifter from left to right. I installed a JBR short shift plate and bushings. They're great. But, I want to see if its possible to move the...
  6. Adjusting cutoffs

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Anyone know how to adjust the cutoffs on the 2013 sky? Pics would be helpful Thanks
  7. adjusting rear height and preload, bc coilovers gen pu

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    So while there is a ton of info on the net about how to ajust the fronts, there really insnt any for the rears. Any of you guys know how to adjust the rear? I have heard that preload is set by twisting the shock until it feels tighten and height is adjsut by the locking rings on the spring...
  8. Adjusting Coilover Ride Height - Is it Practical

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Been considering a suspension upgrade....springs vs coilovers. Living in Northern Alberta there are some concerns doing this as the snowfall for 5 months of the year make this a challenge. I like the idea of the BC coilovers as the ride height can be adjusted. My questions to you folks: If I...
  9. ECU Adjusting While Driving?

    2010-2013 Mazda 3 & Skyactiv Discussion
    so i know, or i think i know, that the computer 'learns' and can relearn based on necessity to ensure proper power, etc. for instance, trying to bypass lag in the electronic acceleration only works for a short time before the computer makes adjustments. anyways, if i'm wrong, shoot me. and...
  10. Adjusting headlights & foglights

    2010-2013 Mazda 3 & Skyactiv Discussion
    I want to adjust the headlights on my 2010 Mazda 3 s sport. I'm not having any luck finding the adjustment screws for the headlights, and the dealer technical advisor is pretty much useless. Where are the adjusters for the headlights? How do I adjust the foglights? They pretty much just point at...
  11. Adjusting LUX Sensitivity of Headlights

    2010-2013 Mazda 3 & Skyactiv Discussion
    The AUTO headlights come on when there's still quite a bit of daylight left. Has anyone changed/lowered the sensitivity through the Personalization Guide yet? Is 1000-2000 lux a better ON threshold than the factory setting of 2000-4000? I have no idea what the lux measurements compare to, so...
  12. Adjusting factory HID headlights

    2010-2013 Mazda 3 & Skyactiv Discussion
    Does anyone know how to raise the HID lowbeams on the 2010 MZ3's. I have been all over the net but I haven't found an answer yet. I have read tutorials on leveling the factory HID's on previous year MZ3's. It appears to be a different set up maybe because of the ATS. Any help would be...
Top