Jet Black 2018 Mazda 3 hatch.
Thinking of getting Enkei PF05 in dark silver 18x8 and matching them up with Michelin PS4s in 225/45/18.
I'm dropped on H&R springs 45mm (1.77 in) front / 30mm (1.17 in) rear.
Helpful input would be appreciated. TIA :)
225/45 tires with RX8 18x8 wheels 2nd Gen Sedan!!! PICS!!!
I have RX8 Wheels that are 18 x 8 with offset of +50mm. Planning to run them with 225/45/18 on my 2011 Mazda 3 i sport sedan. I am on stock height and so not plan to lower. WILL I HAVE ISSUES RUBBING ON THE SUSPENSION OR FENDERS? I have...
Why do they recommend 215x45r18 (stock size) on every 18x8 wheels, at least the ones I looked at. That's a minimum size recommended for an 8" wheel and seems to be stretchy. I wonder if their recommendation based on the car or the wheels' size.
Anyone has this combo can comment on the ride?
Hi guys I would like to know if this setup will rub on a 2014 Mazda 3 hatch with the stock suspension?
I have a friend who run the same thing but with a 40mm offset and nothing rub.
Do you think the 5mm offset will make it rub?
Thank you guys
Here is the setup of my friend with 40mm offset.
I'm thinking about the O.C. Ultraleggera 18x8 48mm offset for my 14 Mazda3 S GT. The stock tires are 215/45R18. I was thinking of pairing that wheel with a set of Conti DWS06. Should I stick with the stock tire size or go up to maybe 225/45R18? I'm at stock ride height and just not...
Got my 3 with plain ol` 16" wheels knowing one of my best friends is area VP for discount tire and I`d be putting new wheels on `er sooner than later. The wheels I`m looking at are available in 18x8 with a 45mm offset (going to run 245/40/18 as they`re EXACTLY the same height as stock). I would...
Hey y'all... So I had an accident (side swiped by an 18 wheeler) and need to replace a wheel and tire. Figured I'd make some lemonade out of lemons; pick up some wheels off Craigslist instead of getting another OEM steel wheel.
The wheels I'm looking at are 18x8 with 50mm offset and tires are...
Has anyone on 18x8 with H&R springs had to roll their fenders? Our tires are 7.5 width stock?
I'm thinking about the Enkie TS-9's.
From my research, I should be ok with 215/45ZR18 despite the wider width correct?
If not, I could drop my tires to 215/40ZR18 to reduce the chance of rubbing?
Would these fit without rolling the rear fenders? I'm on Eibach pro kits and I currently have 18x8 et 45 wheels. As I look, it doesn't seem like it would rub with the offset of 35.Anyone has this setup or maybe close to that offset? I tried on 5mm millimeters spacers and it wasn't quite flushed...
Alrighty guys and gals, I have decided to let go my MSR wheels. These are my favorite wheels thus far and have gotten tons of compliments from them. They are used but in good condition. 2 of them has small curb rashes. Not perfect by any means but they all hold air just fine. I'm located in San...
I'm currently running the above setup on stock suspension and I'd like to do a mild drop to get rid of some of the wheel gap. I'm not looking for an extreme drop as it's a daily driver and I want to keep it relatively practical.
What kind of springs would be ideal for this that would work with...
It was cheap too. It was the late Mitsu Eclipse Spyder GT oem wheels.
Question is, the stock tire size for that car is 235/45/18, which 2100mm circumference. The stock 17 on mine runs 205/50/17 which is 2000mm..
should I just go by rx8 tire size?
Hey guys been gone FOR A LONG TIME. I sold my 3's and got a 2014 6 and just can't use the old rims on the new car.
They have 5k on the wheels and tires thats all the milage i had on the Sky b4 i traded it in. I've got original receipts for the rims and tires. The wheels already have TPMS...